application type for port forwarding soulseekqt

#Application type for port forwarding soulseekqt plus

One of the greater challenges with port forwarding is the vagaries with all different routers.

But in particular, the Mac ecosystem is quite unique because it supports its own port forwarding process and its own version of UPnP. Most of these steps were initially gleaned from this Insteon page and then further augmented by our own experiences. PLEASE NOTE: This requires the newest Airport Utility on your Mac and that your AirPort/Time Capsule/AirPort Extreme is connected to the Internet. b) forwarding ports to your local IP is the important factor. You can find it from your Finder and go into Applications -> Utilities -> AirPort Utility It should NOT be in Bridge mode - it must be in DHCP/NAT mode.įirst and foremost, make sure that the AirPort Utility is available on your Mac and start it. Select the application type from the drop-down menu or leave it as - for device forwarding. PLEASE NOTE - You want to have the newest version of the AirPort Utility (Version 6.3 or higher). Once you start the AirPort Utility, you will see the following screen: Step 2: Open Your AirPort/Time Capsule/AirPort Extreme Once in, you want to go to the Network tab as shown below: Step 3: Make Sure You Are Using DHCP and NAT on your router If you have the password, you should be able to click the Edit button as shown above.

#Application type for port forwarding soulseekqt plus

Then, select the plus symbol (+) underneath the Port Settings, which gives you this screen: Step 4: Set the Port Forwarding on Your Router In the Router Mode dropdown, you want to make sure that DHCP and NAT is selected not Bridge Mode or DHCP Only. APPLICATION TYPE FOR PORT FORWARDING SOULSEEKQT PLUS

Public and Private Ports: this is the port that your camera is on.Description: Personal Web Sharing (VERY IMPORTANT). Private IP Address: this is the Internal IP address listed in the OWLR App as well.You can find the Public and Private ports in the OWLR app under the Camera Settings -> Network section.

APPLICATION TYPE FOR PORT FORWARDING SOULSEEKQT PLUS.